Fixed Access & Broadband
Last updated 12 Oct 2026
At a glance
Fixed access reaches more customer endpoints than any other domain, each with a physical line and a CPE. Every connection involves at least three managed elements plus AAA and IPAM, configured in the right order. The access technology decides which elements and controllers are involved, and the OLT vendor largely decides the controller.
The picture
Broadband B2C activation — SOM orchestrates through ROM to provision OLT, BNG, DHCP/RADIUS, IPAM, ACS, and Cloud WiFi
How it works
The elements
| Element | Role | Typical integration |
|---|---|---|
| BNG / BRAS | Subscriber session termination at the IP edge: IPoE/PPPoE, RADIUS, QoS | NETCONF/YANG (modern); RADIUS/Diameter for sessions; SNMP/CLI (legacy) |
| OLT | PON aggregation: manages ONTs, line cards, PON ports | NETCONF/YANG (modern); proprietary EMS (legacy) |
| ONT / ONU | Customer-side PON termination; handoff to the home network | OMCI on the PON; TR-069 / TR-369 for management |
| CPE / residential gateway | Router and Wi-Fi; the customer’s view of "broadband" | TR-069 / TR-369 via an ACS |
| AAA / RADIUS | Authentication, authorisation, accounting | RADIUS/Diameter from the BNG; provisioning API from OSS |
| IPAM | Address and prefix allocation; CGNAT pools; IPv6 prefix delegation | REST to OSS; coupled to BNG and RADIUS |
The activation chain
Media
Field operationsFibre or copper installed to the premises. Often a field visit.
OLT
Access controllerLine card and PON port configured for the subscriber.
ONT
Access controllerRegistered and activated on the PON.
BNG and AAA
ROM adaptersSubscriber profile created on the BNG and in AAA.
IPAM
IPAMPool or static allocation for the subscriber.
CPE
ACSConfigured through the ACS.
Get one step out of order and the customer sees no service. Activating the ONT before the upstream path exists is the classic failure. If the catalog does not encode these dependencies, operations works around them by hand for years.
Access technologies
| Technology | Active elements | Notes |
|---|---|---|
| GPON / XGS-PON (FTTH) | OLT, ONT, BNG | Dominant new-build technology; modern OLTs are NETCONF/YANG-managed |
| 25G/50G PON, NG-PON2 | Higher-speed OLT/ONT pairs | Same orchestration surface; emerging in business FTTH and 5G x-haul |
| VDSL / FTTC | DSLAM, BNG, copper distribution point | Often pre-NETCONF kit; declining as copper is decommissioned |
| DOCSIS (cable) | CMTS, cable modem | Distinct ecosystem; provisioning differs from PON |
| Fixed wireless access | gNB / eNB, 5GC / EPC, indoor CPE | Sold as fixed; the radio side is orchestrated through the mobile core (9.5) |
| Wholesale access | Wholesaler’s OLT or DSLAM; retail BNG | Retail catalog coordinated with the wholesaler’s order workflow |
What the domain exposes upward
| Abstraction | What it represents | Hides |
|---|---|---|
| Residential broadband | Internet access with a bandwidth tier, managed CPE | BNG profile, RADIUS attributes, OLT line config, IPAM lease, CPE config |
| Business Ethernet / leased line | Symmetric uncontended service over fibre with SLA | OLT business profile, BNG VRF, IP block, monitoring |
| Triple play | Internet, IPTV multicast and VoIP | Multicast groups, IGMP snooping, VoIP CPE provisioning, QoS |
| Wholesale broadband | Retail product on a wholesaler-delivered circuit | Wholesaler order coordination, port mapping, handoff type |
Who owns what
| Entity | System of Record | System of Engagement | System of Reference | Notes |
|---|---|---|---|---|
| Physical access plant (fibre, splitters, PON trees) | Resource Inventory | Field operations | — | Passive; only as good as the last field update. |
| OLT port and ONT assignment | Resource Inventory | Access controller / EMS | ROM | The access controller holds live state; inventory should reconcile from it. |
| Broadband service instance (CFS) | Service Inventory | SOM | COM | TMF641 order state to COM; TMF652 to ROM for each element. |
| Wholesale access circuit | Wholesale provider | Retail order management | Resource Inventory | The retailer holds a reference and the order state; the wholesaler owns the line. |
In practice
Access has fewer controller options than IP/MPLS or the mobile core, because legacy GPON ONTs are vendor-matched to the OLT. The main controllers, such as Nokia Altiplano, Calix SMx, Adtran Mosaic and Huawei iManager / NCE, each combine OLT and ONT control with subscriber management, and increasingly CPE management. In practice the controller follows the OLT vendor.
Multi-vendor access is therefore multi-controller orchestration. Interoperability between vendors is technically possible but rarely deployed in production because of the operational risk.
The trade-off
What it solves
Encoding the activation chain and its dependencies in the catalog lets one broadband order configure every element in the right order, across access technologies.
What it does not solve
- The physical work: installs, field visits and line handovers still set the pace.
- Vendor lock at the OLT layer, which makes each footprint its own controller.
- Incomplete line records for customers connected before current models.
What it adds
- Dependencies across six or more elements must be modelled and kept in step with technology changes.
- Several controllers, one per OLT vendor and technology, behind one SOM.
- Wholesale access adds an external party’s order states and waiting times.
Architecture decision
How should a second OLT vendor be brought into orchestration?
Its own controller, integrated beside the first
Choose when the new footprint is large and the vendor’s controller is mature; SOM routes by technology and vendor.
Under the existing controller’s multi-vendor support
Choose when the existing controller has proven support for that vendor’s OLTs in production today.
Through ROM adapters to the vendor EMS
Choose when the footprint is small or temporary and a full controller is not justified.
Breaks if one controller is assumed to hide vendor differences it does not. ONT, profile and fault handling then diverge per vendor inside workflows.
Takeaways
Key Takeaways
- Every fixed-access connection involves CPE, ONT or modem, OLT or BNG, plus AAA and IPAM.
- Media → OLT → ONT → BNG/AAA → IPAM → CPE must run in order; the catalog must encode it.
- Access technology decides the elements and controllers; most operators run several at once.
- Multi-vendor access is multi-controller, because the controller follows the OLT vendor.
Check yourself
New FTTH customers report "connected light but no internet" on day one. Where do you look first?Show answerHide
The activation order and its later steps: BNG subscriber profile, AAA entry, IPAM allocation and CPE configuration. A registered ONT shows the line is up; the service needs the upstream steps too.
An operator buys a second OLT vendor and expects its existing access controller to manage it. What do you check?Show answerHide
Whether that controller manages the new vendor’s OLTs and ONTs in production. Because ONTs are vendor-matched, the usual result is a second controller, so SOM must route by vendor.